Odroid H2 is a new generation of mainboard based on the Intel Gemini Lake 2.3Ghz Quad-core processor. Featuring DDR4 memory, eMMC version 5 storage, and a graphics card powerful enough to run emulation of the Nintendo Wii, it's a giant leap ahead for ODROID boards.

** NOW IN STOCK **

From June 2019, Rev-B board will be shipped. The improvements are as below; 

– CLK-REQ signal pull resistor is added to support a PCIe-to-SATA bridge board
– 12V SATA power source improvement for high power HDDs.
– Add a M.2 screw for NVMe storage installation
– Preinstalled the latest BIOS 1.05.


Specifications

Form Factor
  • Dimensions: 110mm x 110mm x 47mm
  • Weight: 285 g including heatsink
Processor
  • Intel Celeron J4105 Processor (14nm, TDP 10W)
  • Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
  • 4MB L2 Cache
  • UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
  • Fan-less design
Memory
  • 2 x DDR4 1.2V SO-DIMM slots
  • Dual Channel, up to 2400 MT/s (DDR4-PC19200)
  • Max memory capacity 32GB
    • DDR3 is not supported
Storage
  • 1 x eMMC connector (bootable and selectable on BIOS)
    • Various eMMC modules can be purchased at Hardkernel store
  • 2 x SATA3 6Gbps
  • 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
    • M.2 SATA SSD is not supported
Networking
  • 2 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
  • Realtek RTL8111G
  • Supports Wake-On-Lan
  • LED indicators (Green: Link, Amber: Traffic)
Video
  • 1 x DisplayPort 1.2 (up to 4K@60Hz)
  • 1 x HDMI 2.0 (up to 4K@60Hz)
  • Dual simultaneous display support
Audio
  • 1 x Audio out (3.5mm jack)
  • 1 x Audio in (3.5mm jack)
  • 1 x SPDIF out (ALC662, HDA codec)
External I/O
  • 2 x USB 3.0 Host ports
  • 2 x USB 2.0 Host ports
  • 1 x Peripheral Expansion Header (20-pin, 2.54mm pitch)
    • 1 x DC 5V, 1 x DC 3.3V, 5 x GND
    • 2 x UART (TXD/RXD/RTS/CTS)
    • 2 x I2C (SCL/SDA)
    • 1 x External Power Button
    • All 3.3V I/O signal level
Other features
  • Passive Heatsink
  • BIOS Backup Battery
    •  Maintains system time and BIOS settings
  • Power Button
  • Reset Button
  • System LEDS Indicators:
    •  Red (PWR) – Solid light when DC power is supplied
    •  Blue (left, ALIVE) – Solid light when System is running
    •  Blue (right, RESET) – When the RESET button is pressed
    •  Amber (SATA) – Flashes when there is data transfer
    •  Green (NVMe) – Flashes when there is data transfer
  • Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
    • Active Cooling Fan is optional
    • Connector (4-pin, 1.25mm pitch)
Power
  • 1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
  • DC 14V ~ 20V (up to 60W)
    • DC 15V/4A power adaptor is recommended
  • Power consumption:
    •  IDLE : ≃4W
    •  CPU Stress : ≃14W
    •  CPU+GPU Stress : ≃22W
    •  Power-off : ≃0.5W
    •  Suspend : ≃0.6W

For a real world demonstration of the unit, take a look at the video below - the H2 running Dolphin on Linux and emulating the Nintendo Wii version of Mario Kart perfectly.



The system can run Windows 10 in a Virtual Machine. 2 of the 4 memory cores are reserved, and if
8GB of RAM is installed 4GB of this will be reserved for Windows 10.


Motherboard Specification
Processor Intel Gemini Lake 2.3Ghz Quad-core processor J4105 (14nm) with 4MiB Cache
RAM Memory Dual-channel Memory DDR4-PC19200 (2400MT/s) (not included) 2x Slots (up to 32Gb)
Graphics Intel UHD Graphics (Gen9.5) 600 (GT1) 700Mhz - 4K compliant
Storage Slot for M.2 NVMe SSD, Slot for eMMC Card (not included)
I/O Connectors (ODROID) HDMI-A x 1, USB 3.0 Host x 2, USB 2.0 Host x 1, PWM for Cooler Fan, UART for serial console 30Pin : GPIO/IRQ/SPI/ADC, 12Pin : GPIO/I2S/I2C
Network Ethernet RJ-45
Input Power 14-20V DC Power (not included)
Contents Of Box
Product Odroid H2
Power Adaptor 14-20V Power Adaptor (UK,EU,US available) - Optional
Additional accessories Heatsink, Case (4 types available)

Odroid-H2 [77800]

  • Brand: Hard Kernel
  • Product Code: Odroid-H2 X86 Quad-core SBC
  • Availability: In Stock
  • 120.00€


Related Products

Odroid SATA Data and Power Cable [77809]

Odroid SATA Data and Power Cable [77809]

SATA cables are perfect for system builds with tight fitting environments with ODROID-H2 Case Type 1..

4.99€

Odroid-H2 15V/4A PSU [77801]

Odroid-H2 15V/4A PSU [77801]

Power Supply for Odroid H2 Unit (Switching mode power adapter).AC 100~240 Volt inputDC 15 Volt / 4A ..

14.99€

Odroid-H2 Case 1 [77802]

Odroid-H2 Case 1 [77802]

This “Case Type 1” is designed for the user who needs high bandwidth network capability with high ca..

14.99€

ODROID-H2/N2 Bracket for VESA Mount [77309]

ODROID-H2/N2 Bracket for VESA Mount [77309]

Make your ODROID-H2 or ODROID-N2 ready for VESA Mount. Add this acrylic bracket to the H2 or N2 and ..

4.50€

Seagate 2.5", 500GB, SATA3, BarraCuda HDD for ODroid-H2 [77332]

Seagate 2.5", 500GB, SATA3, BarraCuda HDD for ODroid-H2 [77332]

Experience the highest capacity, and the thinnest 2.5-inch hard drive you’ve ever seen. With 50GB of..

42.04€

Seagate 2.5", 1TB SATA3, BarraCuda HDD for ODroid-H2 [77331]

Seagate 2.5", 1TB SATA3, BarraCuda HDD for ODroid-H2 [77331]

Experience the highest capacity, and the thinnest 2.5-inch hard drive you’ve ever seen. With 1TB of ..

48.05€

Odroid-H2 Metal Case  [77807]

Odroid-H2 Metal Case [77807]

The ODROID H2 Metal Case is an aluminium case for the Odroid H2 board, and is designed for installat..

25.00€

Odroid-N2 Metal Case  [77808]

Odroid-N2 Metal Case [77808]

The ODROID N2 Metal Case is an aluminium case for the Odroid N2 board, and is designed for installat..

25.00€