To celebrate ODROID’s 10th anniversary, we present the ODROID-GO Game Kit! 

It includes a special anniversary board with all the parts to put together your own game kit and see the workings behind such a device. It is not only a fun assembly project but also an educational tool to learn about all the hardware and software that goes into building such a device.

odroid-go

PACKAGE INCLUDES

A. 1x ODROID-GO board
B. 1x Front enclosure
C. 1x Back enclosure
D. 1x 2.4 inch LCD module
E. 1x 4 button rubber
F.  1x 2 button rubber
G. 2x 2 button rubber
H. 1x 8Ohm 0.5W speaker
I.  1x 10pin male header
J. 10x screws
K. 1x LCD window
L. 1x button set
M. 1x Micro USB cable
N. 1x 1200mAh Li-ion battery


Have fun building your own handheld game kit while learning about the internal functions of each part and its purpose. Learn how each button is attached to a PCB switch pad, what materials are used, and how to put it all together to create a button control pad to play games! Learn how to connect power, speakers and how to download and install an OS. Learn why certain pieces are made of particular materials and why you need certain connectors. Since the device is clear, all the internal components and all the lights are visible. 


PLAY VINTAGE GAMES
Once you have assembled the ODROID-GO, you can download and install the games of yesteryear to play - comfortable in the knowledge that they're on a device you built for yourself!


ASSEMBLY INSTRUCTIONS


This section shows you how you can build the ODROID-GO. Please carefully follow the instruction below.


LCD window

First, in order to protect LCD screen, you have to place the enclosed plastic screen cover on the front enclosure. Please completely remove the sticker on the back of the screen cover and carefully place it on the front enclosure.

   


LCD screen

Second, you need to attach the 2.4” LCD screen to the front enclosure. Please note that you must remove the vinyl cover on the LCD screen before placing LCD module in the front enclosure. Also, you would need to slightly wipe or blow out the window cover or LCD screen in order to remove any dust or fingerprints.

  

Play buttons

Third, place the play buttons in the front enclosure. You need to cut and remove the plastic buttons (an arrow key piece, buttons 'A' and 'B') from the plastic button set enclosed, and then put the rubber pieces on top of the plastic keys.


 


Main board

Next is the main part of the assembling instructions. Please carefully put the ODROID-GO board in the front enclosure and connect the LCD cable to the board. After the LCD screen cable is firmly connected, you can fasten the main board with the screws (3x) enclosed.

  


You also need to connect the battery pack and speaker module to the ODROID-GO board. It would be a good idea to wrap the speaker wires as shown in the picture, otherwise, it would be difficult to close the back enclosure.


   

Power key

Another piece which you have to cut on the plastic button set is the power key, and you can place the power switch at the side of the ODROID-GO.

Close the back enclosure

Finally, you can close the back enclosure of the ODROID-GO with the screws (6x) enclosed. You can also try to turn on the ODROID-GO before closing the back enclosure.

Testing before playing

You can turn the device on or off with the power switch on the right side of the ODROID-GO. Please softly slide the key up to turn on or down to turn off.

Memory card

Since the ODROID-GO loads the games from the memory card (Micro SD type), you must insert a memory card in the card slot on the bottom of the ODROID-GO. In order to copy the game images to the memory card, please visit the link.

If the memory card is not inserted or fails for any reason, you will have an error screen when you turn on the ODROID-GO.

ODROID-GO [77900]

  • Brand: Hard Kernel
  • Product Code: ODROID-GO
  • Availability: In Stock
  • 39.99€


  • 5 or more 34.99€

Related Products

Cases, Buttons and Speaker kit for ODROID-GO [77902]

Cases, Buttons and Speaker kit for ODROID-GO [77902]

Cases, Buttons and Speaker Kit for ODROID-GO This is a spare mechanical parts pack for ODROID-G..

6.99€

ODROID 16x2 LCD kit for ODROID-GO [77904]

ODROID 16x2 LCD kit for ODROID-GO [77904]

16x2 LCD kitPackage includes - 16x2 LCD module. LCD I2C interface module pre-assembled.- 5x 10c..

9.99€

ODROID Jumper Wires for ODROID-GO [77910]

ODROID Jumper Wires for ODROID-GO [77910]

Set of 10cm long jumper wires with DuPont connectors.Including:-- 40 x male to male- 40 x female to ..

9.99€

ODROID IR Sensor for ODROID-GO [77909]

ODROID IR Sensor for ODROID-GO [77909]

IR Sensor : ROM-WT138L(N)The ROM-WT138LM(N) series are remote control receiver modules. Pin diode an..

1.99€

ODROID Breadboard (Large) for ODROID-GO [77906]

ODROID Breadboard (Large) for ODROID-GO [77906]

Breadboard (Large) : Full Size This is a full-size breadboard for use in prototyping with theA ..

4.99€

ODROID Breadboard (Small) for ODROID-GO [77907]

ODROID Breadboard (Small) for ODROID-GO [77907]

Breadboard (Small) : Half SizeThis is a half size breadboardA standard double-strip in the middle an..

9.99€

ODROID Color Sensor for ODROID-GO [77908]

ODROID Color Sensor for ODROID-GO [77908]

Color Sensor : TCS3472 RGB Sensor with IR filter- Red, Green, Blue (RGB), and Clear Light Sensing wi..

9.99€

ODROID Ultrasonic Ranging Module for ODROID-GO [77911]

ODROID Ultrasonic Ranging Module for ODROID-GO [77911]

Ultrasonic Ranging Module HC - SR04Ultrasonic ranging module HC - SR04 provides 2cm - 400cm non-cont..

5.99€

ODROID-GO QWERTY Keyboard [77912]

ODROID-GO QWERTY Keyboard [77912]

QWERTY Keyboard for ODROID-GO Turn your ODROID-GO to a portable handheld computer.ODROID-GO can..

19.99€

Board for ODROID GO [77901]

Board for ODROID GO [77901]

Board for ODROID-GOThis is a spare replacement board for the ODROID-GO - useful for replacement part..

21.99€

Level Shifter  for ODROID-Go - 5V to 3.3V [77917]

Level Shifter for ODROID-Go - 5V to 3.3V [77917]

4 Channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.This bi-directional logic l..

2.00€

Step Up DC to DC - Input 0.9-5V, Output 5V [77918]

Step Up DC to DC - Input 0.9-5V, Output 5V [77918]

Allows for the step-up of the Voltage of an input source lower than 5V to be boosted up to 5V– Input..

2.50€

Servomotor : Full Rotation - for ODROID-GO [77919]

Servomotor : Full Rotation - for ODROID-GO [77919]

Designed for ODROID GO, the Servo Motor (full rotation) is an experimental component designed to sho..

2.50€